Fire Pump Foam Proportioning System Equipment

• Customization: Available
• Type: Motor Drive, Hydro Turbine Drive Diesel Drive
• Size of Proportioner: Dn65~Dn250 (2.5"~10")
• Model NO.: PHP
• Flow Range: 6~400L/S
• Working Pressure: 0.6~1.6MPa
• Transport Package: Crate
• Specification: CCC, ISO9001
• Trademark: GAN
• Origin: Shenzhen, China

Product Description

Balance Pressure Foam Proportioning System, Positive Displacement Foam Pump System (PHP)

The PHP  balance pressure foam proportioning unit system mainly consist of normal pressure tank, balance valve, foam pump, foam proportioner, control valves and control system. The pump pumps out foam concentrate from the tank and it will flow through the balance valve and reached proportioner finally. Meanwhile, pressurized water also flows into proportioner and its pressure will be conveyed to balance valve from a branch pipe. Balance valve will adjust its opening degree according to the pressure and flow of water and reach dynamic equilibrium to guarantee an accurate mixing ratio. It can be feed foam concentrate even when the device is working, which prolongs the working time. There are two different kinds of dynamics to drive the foam pump: motor driven and hydro turbine driven.

Motor Driven Balanced Pressure Foam Proportioning Unit
The motor driven balance pressure foam proportioning system drives the foam pump with a motor. There are two motors that if one of them broken that the spared one will switch to work to guarantee the device operate normally.

Hydro turbine Driven Balance Pressure Foam Proportioning Unit:
The hydro turbine driven balance pressure foam proportioning system rely on a hydro turbine to drive the foam pump. While, the hydro turbine is driven by pressurized water.

Application:
The unit usually constitutes foam spray system and low/high expansion foam extinguishing system with pipelines, foam generators and foam nozzles. This unit provides foam solution for these systems through pipelines which are distributed in all destination areas and they are connected with generators or foam nozzles. The system works once there is fire somewhere and solution was transported to destination area through pipelines. Thus destination area gets foam solution to put out fire with foam generators or foam nozzles.

Technical parameters:

Model	Inlet/Outlet Size (mm)	Working Pressure (MPa)	Flow Range (L/S)	Mixing Ratio
PHP3/24	DN65	0.6~1.2 or 0.6~1.6	6~24	3%~3.9% or 6%~7%
PHP6/24
PHP3/42	DN100		18~42
PHP6/42
PHP3/72			18~72
PHP6/72
PHP3/100	DN150		24~100
PHP6/100
PHP3/120			24~120
PHP6/120
PHP3/160	DN200		24~160
PHP6/160
PHP3/200			48~200
PHP6/200
PHP3/260			48~260
PHP6/260
PHP3/300	DN250		75~300
PHP6/300
PHP3/400			75~400
PHP6/400

Notes: we make available customized design for our clients





Company Information:

With a history of more than 20 years, Shenzhen Winan Industrial Development Co. Ltd. is a professional manufacturer and exporter who are focusing on designing, developing and manufacturing all kinds of Fire fighting equipment. The company now has a large area of industrial workshops of more than 10000 square meters, located in Shenzhen, China, with convenient transportation access.

All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network around the world.




Certificates:

All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network around the world.




FAQ:

1. Do you offer free sample for your clients?

Yes, we can offer you free sample.

2. What's the MOQ of your products?

MOQ is ONE pcs/set.

3. Are you manufacturer with your own factory?

Yes, we are the manufacturer for more than 20 years

4. What's your?payment terms?

We accept T/T, L/C, Western Union, Paypal,etc.

5. How long is the?delivery time?

Usually around 15 days after payment.

6.Can you accept OEM?

Yes, we do customized design for our clients.