Fire Sprinkler System Wet Alarm Check Valve

• Nominal Diameter: Dn80 Dn100, Dn150, Dn200
• Rated Working Pressure: 1.2MPa or 1.6MPa
• Sprinkler System Type: Wet Type
• Matched Sprinkler: Closed
• Transport Package: Crate
• Specification: CCC, ISO9001
• Model NO.: zsfz
• Trademark: GAN
• Origin: Shenzhen, China

Product Description

Fire Sprinkler System Wet Alarm Check Valve

 Application:
1. Widely use in office, school, kitchen and warehouse;
2. Work by temperature sensitive;
3. Vairous types to choose;
4. Easy install and use.
5. OEM and ODM available
 Parameter:

Model	ZSFZ
Type	Wet fire alarm valve
Material	Brass, Cast Iron
Norminal diameter	DN100,DN150, DN200.
Norminal working pressure	12bar~16bar
Strength test pressure	4.8Mpa
Flux(l/min)	15s

  Size:

Model	Norminal Diameter(mm)	Norminal Working Pressure(MPa)	Body Height(mm)	Flange Outer Diameter (mm)	Water Pressure Reduced	Drive Time(s)
ZSFZ100	DN100	1.2~1.6	250	220	<0.07	<15
ZSFZ150	DN150	1.2~1.6	270	285	<0.07	<15
ZSFZ200	DN200	1.2~1.6	370	340	<0.07	<15

Working Principle:
The alarm valve is always on a set condition the system side is full of pressurized water. The heat
sensitive component on the sprinkler will blast and spray automatically when there is fire
somewhere. Thus the pressure at system side will reduce and then valve flap opens because of
pressure difference. One hand the water supplied to system side, on the other hand a small part of
water flows to delayer and reach water motor alarm finally to make it alarm. The pressure switch
turns pressure signal to electric signal and start fire pump and auxiliary fire-fighting equipments to
put out the fire. Water flow inductor will also work and show the position of fire.


Package




The Project We Finished