Foam Pump Skid Balanced Pressure Proportioning System for Fire Fighting

• Customization: Available
• Type: Electric, Diesel, Hydraulic
• Flow Range: 200-4000gpm
• Model NO.: PHP
• Working Pressure: 6-12 Bar
• Mixing Ratio: 3% or 6%
• Ration Controller: 3"-8"
• Material: 304 Ss
• Transport Package: Wooden Case
• Specification: 200-4000GPM
• Trademark: WINAN
• Origin: Shenzhen, China
• HS Code: 8479820090
• Production Capacity: 100set/Month

Product Description

Foam Pump Skid Balanced Pressure Proportioning System For Fire Fighting
 

Introduction
The balance foam proportioning system is designed to supply proportionable foam solution for foam system. A foam pump acquires foam concentrate into proportioner from a foam storage tank. It is especially applicable to petrochemical enterprises, oil depots, wharfs and drilling platforms. The system mainly consists of atmospheric foam tank, foam pump, dynamic unit, balance valve, foam proportioner, control valves and control system.

Principle
When a fire happens, water pump and foam pump will be started. The pressure of water and foam solution will be sensed by balance valve, balance valve will adjust its opening degree to reach dynamic equilibrium. Foam solution and pressurized water will be mixed in foam proportioner to achieve foam solution. If the pressure and flow from water inlet is unstable, balance valve will adjust the amount of foam concentrate into proporitoner to reach dynamic equilibrium. By this way the system get accurate mixing ratio. Atmospheric foam tank can be feed even when the system is under operating, which prolongs the working time.

Category
The system can be divided into motor driven, hydraulic turbine driven, diesel driven or the combination driven of above power according to power source of foam pump.

Hydraulic Turbine Drive
The hydraulic turbine driven balance foam proportioning system relies on a hydraulic turbine to drive the foam pump. Hydraulic turbine requires no electrical power-operating solely by the pressure of the inlet water supply.

Motor Driven
Motor driven balance foam proportioning system drives foam pump with a electric motor. There are two motors available in this system. If the duty pump is broken, the standby pump will replace it to make sure the system can operate normally.

Combination Drive of Diesel & Motor
The combination of diesel and motor driven balance foam proportioning system has two power source to drive foam pump. To drive foam pump with a diesel is a reliable way. The system can keep working even when there is power failure. Usually diesel drive foam pump proportioning system will combine with motor driven.

Parameters

Model	Size of Proportioner (mm)	Working Pressure Range (MPa)	Flow Range (L/S)	Mixing Ratio
PHP3/24	DN65	0.6~1.2 or 0.6~1.6	6~24	3%~3.9% or 6%~7%
PHP6/24
PHP3/42	DN100		18~42
PHP6/42
PHP3/72			18~72
PHP6/72
PHP3/100	DN150		24~100
PHP6/100
PHP3/120			24~120
PHP6/120
PHP3/160			24~160
PHP6/160
PHP3/200	DN200		48~200
PHP6/200
PHP3/260			48~260
PHP6/260
PHP3/300	DN250		75~300
PHP6/300
PHP3/400			75~400
PHP6/400

Instruction
1. Make cement concrete platforms for both the system and foam storage tank before installation. These two platforms should be in an equivalent level and close to each other. (The approximate distance between system foam inlet and storage tank foam outlet is 70-100cm)
2. Put the system and storage tank on their respective platforms and fix them with foundation bolts.
3. Connect storage tank foam outlet with system foam inlet with corrugated flexible pipe. Same with storage foam reflux inlet and system foam reflux inlet.
 

FAQ

1. Do your offer free sample for your clients?

    Yes, we offer free sample for many of the products

2. What's the MOQ of your products?

   Our MOQ is one (1) piece/set.

3. Are you manufacturer with your own factory?

    Yes, we are the manufacturer for more than 20 years

4. What's your payment terms?

    We accept T/T, L/C, Western Union, Paypal,etc.

5. How long is the delivery time?

    Usually around 15 days after payment.

6. Do you have technical support?

    Yes, we have a professional engineering team.

7. Do you have warranty?

    Yes, all products have one year warranty.

8. Can you accept OEM?

    Yes, we do customized design for our clients.

Contact Us