Foam Bladder Tank for Fire Fighting Equipment

• Capacity: 500-10000L (130~2650 Gallon)
• Working Pressure: 0.6~1.2MPa (6~12 Bar)
• Type: Horizontal and Vertical
• Mixing Ratio: 3% or 6%
• Size of Proportioner: Dn80~Dn250 (3"~10")
• Flow Range: 4-360L/S (63~1513gpm)
• Model NO.: PHYM-10
• Transport Package: Crate or Pallet
• Trademark: GAN
• Origin: Shenzhen, China

Product Description

Foam Bladder Tank for Fire Fighting Equipment 

The PHYM series Foam Bladder Tank is to provide a foam solution for fire foam system. It mainly consists of the pressure tank, bladder, proportioner, control valves, pressure gauge, and pipelines. High-pressure water is needed to swap out foam concentrate (stored in the bladder in the tank) from the tank as a certain proportion. Foam concentrate then mixes with pressurized water and form foam solution. For bladder is separated from the water that it can be utilized next time if not finished. Besides, there is a feed inlet to refill or rechange foam concentrate.

Working Principle:
When pressurized water flows through the proportioner, a small part of water (3%~6%) flow into tank from the water inlet and press bladder to swap out equal foam concentrate to mix with another part of water (97%~94%) in proportioner. Foam solution flows out from outlet and was supplied to foam generators or foam nozzles through pipelines.

Application:
 

The unit usually constitutes foam spray system and low/high expansion foam extinguishing system with pipelines, foam generators and foam nozzles. This unit provides foam solution for these systems through pipelines which are distributed in all destination areas and they are connected with generators or foam nozzles. The system works once there is fire somewhere and solution was transported to destination area through pipelines. Thus destination area gets foam solution to put out fire with foam generators or foam nozzles.

Characteristic:
1. Big flow pressure range and small pressure loss.
2. Widely used both in mid-multiples and low multiples foam extinguishing system.
3. Two types: horizontal and vertical.

Technical parameters:

Working Pressure Range		0.6~1.2MPa
Pressure Drop		0.2MPa
Test Pressure	Intensity	1.5MPa
	Seal	1.32MPa
Tank Capacity		500~10000L
Size of Proportioner		DN80~DN250
Flow Rate		4~360L/S
Mixing Ratio		3% or 6%

Notes: we make available customized design for our clients

Contact Us
Address: No.17 -1, Fengshun Road, Tongle,  Longgang District, Shenzhen City, Guangdong, China.
Website: winanfire.en.made-in-china.com
  
Tel:   [phone]
Fax: [phone]







About Us


    Shenzhen Winan Industrial Development Co., Ltd. Was set up in 1995 with registered capital of 13, 680, 000RMB. We specialized in manufacturing fire-fighting Equipment for 20 years and we devote to provide clients with high quality & reliable products. 

    The company now has a large area of industrial workshops of more than 10000 square meters. We possess all kinds of advanced producing equipments, sophisticated manufacturing process and modernized testing center. Our products contain foam system, sprinkler system, fire monitors, fire hydrant, water mist system and valves. 

    Winan fire-fighting passed the ISO9001: 2000 Quality Management System Certification in 2001 and we also passed the CCCF Product Quality Certification of Ministry of Public Security fire products in 2004. Products manufactured by Winan fire-fighting were assessed as the "Chinese high-quality brand-name products" by Chinese Quality Management Juries. The company was assessed as the "AAA" honest enterprise by Ministry of Commerce Economic Academy and it is the member of Chinese Fire Protection Association. 

The Project We Finished



Certifications