INTRODUCTION
The foam bladder tank is the main unit of the foam extinguishing system. The foam tank and the
low/medium expansion foam generator construct the low/medium foam spraying system. It can
also construct the high expansion total flooding extinguishing system with high expansion foam
generator. It aims at fire of class A and class B, especially for fire of class B. The foam bladder tank
mainly applied in occasions such as places where inflammable liquid was produced, stored and
transported. It is especially suitable to put out fire caused by inflammable liquid tank or large
scale of spill fire.
PRINCIPLE
The device consists of pressure tank, bladder, proportioner, pressure gauge, valves and pipeline.
A pump is needed to supply pressurized water. When pressurized water flow though proportioner,
a small part of water (3%-6%) flow into tank from branch pipe to press the bladder to swap out
equal foam concentrate and then mix with another part of water (97%-93%) to form foam
solution in proportioner and provide to foam generator.
PARAMETERS
Working Pressure Range (MPa) 0.6~1.2 (87~174 PSI)
Pressure Drop (MPa) ≤0.2
Test Pressure
Strength (MPa) 1.5
Sealing (MPa) 1.32
Tank Capacity (L) 200~15000 (52~2650 Gallon)
Size of Proportioner (mm) DN80~DN250 (3"~10")
Flow Capacity(L/S) 4~360 (63~1513 GPM)
Mixing Ratio (L/S) 3% OR 6%
INSTALLATION
Device should be installed at places with shelter to avoid sun and rain. Ambient temperature
should be within 40°C and leave enough space for operation. Device should be installed at
concrete floor and fastened with anchor nuts.
Do the hydraulic test after installing. Open the tank vent valve first then fill water into bladder
from concentrate draining pipe. Then close tank vent valve when bladder is full of water .
Pressurize the system and keeping for 10 minutes when pressure gets test pressure, tank should
have no leakage. Close water inlet valve and open water drainage valve and concentrate drainage
valve to drain water away in tank and bladder. (We will do this test when products leave the
factory)
Company Information:
With a history of more than 20 years, Shenzhen Winan Industrial Development Co. Ltd. is a professional manufacturer and exporter who are focusing on designing, developing and manufacturing all kinds of Fire fighting equipment. The company now has a large area of industrial workshops of more than 10000 square meters, located in Shenzhen, China, with convenient transportation access.
All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network around the world.
Certificates:
All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network around the world.
FAQ:
1. Do you offer free sample for your clients?
Yes, we can offer you free sample.
2. What's the MOQ of your products?
MOQ is ONE pcs/set.
3. Are you manufacturer with your own factory?
Yes, we are the manufacturer for more than 20 years
4. What's your?payment terms?
We accept T/T, L/C, Western Union, Paypal,etc.
5. How long is the?delivery time?
Usually around 15 days after payment.
6.Can you accept OEM?
Yes, we do customized design for our clients.
Audited Supplier 
){kind=link}