Different Capacity Factory Price Foam Bladder Tank for Foam Fire Suppression System

• Customization: Available
• Tank Capacity: 500-10000L (130~2650 Gallon)
• Flow Range: 4-360L/S (63~1513gpm)
• Model NO.: PHYM
• Proportioner Size: Dn80~Dn250 (3"~10")
• Working Pressure: 0.6MPa~1.2MPa
• Mixing Ratio: 3% or 6%
• Type: Vertical & Horizontal
• Transport Package: Crate or Pallet
• Trademark: GAN
• Origin: Shenzhen, China
• HS Code: 8424100000
• Package Size: 70.00cm * 30.00cm * 60.00cm
• Package Gross Weight: 40.000kg

Product Description

Different Capacity Foam Bladder Tank for Foam Fire System

The PHYM series Foam Bladder Tank is to provide foam solution for fire foam system. It is mainly consist of pressure tank, bladder, proportioner, control valves, pressure gauge and pipelines. High-pressure water is needed to swap out foam concentrate (stored in bladder in the tank) from the tank as a certain proportion. Foam concentrate then mix with pressurized water and form foam solution. For bladder is separated from the water that it can be utilized next time if not finished. Besides, there is feed inlet to refill or rechange foam concentrate.

Working Principle:
When pressurized water flow through the proportioner, a small part of water (3%~6%) flow into tank from water inlet and press bladder to swap out equal foam concentrate to mix with another part of water (97%~94%) in proportioner. Foam solution flows out from outlet and was supplied to foam generators or foam nozzles through pipelines.

Application:
 

The unit usually constitutes foam spray system and low/high expansion foam extinguishing system with pipelines, foam generators and foam nozzles. This unit provides foam solution for these systems through pipelines which are distributed in all destination areas and they are connected with generators or foam nozzles. The system works once there is fire somewhere and solution was transported to destination area through pipelines. Thus destination area gets foam solution to put out fire with foam generators or foam nozzles.

Characteristic:
1.    Big flow pressure range and small pressure loss.
2.    Widely used both in mid-multiples and low multiples foam extinguishing system.
3.    Two types: horizontal and vertical.

Technical parameters:

Working Pressure Range		0.6~1.2MPa
Pressure Drop		0.2MPa
Test Pressure	Intensity	1.5MPa
	Seal	1.32MPa
Tank Capacity		500~10000L
Size of Proportioner		DN80~DN250
Flow Rate		4~360L/S
Mixing Ratio		3% or 6%

 

Notes: we make available customized design for our clients




 

Shenzhen Winan Industrial Development Co., Ltd.

No. 18, Fengshun Road, Tongle, Longgang District, Shenzhen City, Guangdong, China

  

   

   

Website: http://winanfire.en.made-in-china.com